Still FXD 20 Скачать руководство пользователя страница 66

Страница: 66 / 162

NOTE

Always adjust your speed to suit the route,

any dangers and the load. Use the truck on

ground that has the correct surface and hard-

ness.

Driving with the version without

pedals

DANGER

Risk of serious injury
Always keep your body inside the driver's compart-

ment while the truck is moving.

WARNING

Be aware of the position of the drive wheel.
Slowly start the truck.
Check the position of the drive wheel on the display.

NOTE

Always operate the joystick slowly, as the

truck reacts immediately. Abrupt starts, brak-

ing or reversal of drive direction must be avoi-

ded at all costs.

NOTE

The truck accelerates in proportion to the

pressure exerted on the joystick.

Use

Driving

11648011751 EN - 02/2021 - 06

Содержание FXD 20



































































































































































Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды

Still FXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды