Still FXD 20 Скачать руководство пользователя страница 23

Страница: 23 / 162

Safety regulations for handling consumables

Permissible consumables

WARNING

Consumables can be dangerous.
It is necessary to follow the safety regulations when

handling these substances.

Refer to the maintenance data table for the

permissible substances necessary for opera-

tion.

Oils

DANGER

Oils are flammable!

–

Follow the statutory regulations

–

Do not allow oils to come into contact

with hot motor parts.

–

No smoking, fires or flames!

DANGER

Oils are toxic!

–

Avoid contact and consumption

–

In case of inhalation of steam or

fumes, breathe fresh air immediately.

–

After contact with the eyes, rinse thor-

oughly with water (for at least 10 mi-

nutes) and then consult an eye spe-

cialist.

–

If swallowed, do not induce vomiting.

Seek immediate medical attention.

WARNING

Prolonged intensive contact with the skin

can result in loss of skin oils and cause

irritation.

–

Avoid contact and consumption.

–

Wear protective gloves!

–

After any contact, wash the skin with

soap and water and then apply a skin

care product.

–

Immediately change soaked clothing

and shoes.

WARNING

There is a risk of slipping on spilled oil, particularly

when combined with water!

–

Collect spilled oil immediately using an oil-binding

agent and dispose of it in accordance with regula-

tions.

ENVIRONMENT NOTE

Oils are water pollutants!
Always store oil in containers that comply with

the applicable regulations.
Avoid spilling oils.
Collect spilt oil immediately using an oil bind-

ing agent and dispose of it in accordance with

regulations.
Dispose of old oils according to the applicable

regulations.

Safety

Safety regulations for handling consumables

11648011751 EN - 02/2021 - 06

Содержание FXD 20



































































































































































Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды

Still FXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды