Still FXD 20 Скачать руководство пользователя страница 67

Страница: 67 / 162

The operator selects the direction of travel us-

ing the joystick. The joystick has two positions:

●

Forward travel (1)

●

Reverse travel (2)

–

Put the truck into service

Forward travel

–

Push the joystick to the left (1) to travel for-

wards (in the opposite direction to the

forks).

Reverse travel

–

Push the joystick to the right (2) to travel

backwards (in the direction of the forks).

WARNING

Restricted visibility
During reverse travel, visibility may be restricted. Be

very careful. Make sure that the path behind is clear

before travelling in reverse.

Reversing the direction of travel

–

Push the joystick to the left (1) or to the

right (2).

–

Push the joystick in the opposite direction.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.
If the forklift operator has left their seat, the

direction of travel cannot be reversed.



Use

Driving

11648011751 EN - 02/2021 - 06

Содержание FXD 20



































































































































































Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды

Still FXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды