Still EXD 18, Оригинальное руководство пользователя

Страница: 73 / 146

–
Then raise the load arms (2) to lift the load
from the ground.
–
Lower load (Q1) again as close as possible
to load (Q2) before driving.
CAUTION
Make sure that there is enough space above load
(Q2) so as not to crush the top of the pallet.
–
Reverse the truck slowly to remove the pal-
lets from the storage area.
CAUTION
The total load (Q1) + (Q2) must not exceed 1800 kg.
It is essential that Q1 is less than Q2 (see details on
reading the double stacker label).
Transporting two loads
–
The normal direction of travel is forwards.
–
In the event of poor visibility, move slowly
and carefully and work with guidance.
–
Do not travel with a load (Q1) on the forks if
there is no load (Q2) on the load arms
above 300 mm from the ground.
–
It is imperative that the heavier of the two
loads (Q2) be placed down on the load
arms.
–
Keep the upper load (Q1) as close as possi-
ble to load (Q2) at all times.
Setting down two loads
–
Carefully move the truck to the desired
area.
–
Raise the forks clearly above the level
where the load is to be placed.
–
Slowly move the loads towards the storage
area.
–
First of all, place the lower pallet on the
ground and then place the upper pallet on
the first level.
–
Slowly remove the truck in a straight line.


Use
4
Transporting loads
63 1160 801 15 51 EN - 02/2021 - 11