background image

FS 56, FS 56 R, FS 56 C, FS 56 RC

English

3

The user is responsible for accidents or 

risks involving third parties or their 

property.
Do not lend or rent your power tool 

without the User Manual. Be sure that 

anyone using it understands the 

information contained in this manual.
The use of machines that emit noise 

may be limited to certain hours of the 

day as specified by national and/or 

regional or local regulations.
Anyone operating the machine must be 

well rested, in good physical health and 

in good mental condition.
If you have any condition that might be 

aggravated by strenuous work, check 

with your doctor before operating a 

machine.
If you have a pacemaker: The ignition 

system of your machine produces an 

electromagnetic field of very low 

intensity. This field may interfere with 

some pacemakers. STIHL recommends 

that persons with pacemakers consult 

their physician and the pacemaker 

manufacturer to reduce any health risk.
Anyone who has consumed alcohol or 

drugs or medicines affecting their ability 

to react must not operate a power tool.
Depending on the cutting attachment 

fitted, use your power tool only for 

cutting grass, wild growth, shrubs, 

scrub, bushes, small diameter trees and 

similar materials. 
The machine must not be used for any 

other purposes – risk of accidents!
Only use cutting attachments and 

accessories that are explicitly approved 

for this power tool model by STIHL or 

are technically identical. If you have any 

questions in this respect, consult your 

dealer. Use only high-quality parts and 

accessories. in order to avoid the risk of 

accidents and damage to the machine.
STIHL recommends the use of genuine 

STIHL tools and accessories. They are 

specifically designed to match the 

product and meet your performance 

requirements.
Never attempt to modify your power tool 

in any way since this may increase the 

risk of personal injury. STIHL excludes 

all liability for personal injury and 

damage to property caused while using 

unauthorised attachments.
The guard provided with your machine 

may not protect the operator from all 

foreign objects (gravel, glass, wire etc.) 

ejected by the revolving cutting 

attachment. Ejected objects may also 

ricochet and strike the operator.
Do not use a high-pressure washer to 

clean the power tool. The solid jet of 

water may damage parts of the unit.

Clothing and equipment

Wear proper protective clothing and 

equipment.

Do not wear clothing which could 

become trapped in wood, brush or 

moving parts of the machine. Do not 

wear a scarf, necktie or jewelry. Tie up 

and confine long hair above your 

shoulders.

Sturdy shoes with non-slip shoes are 

permissible only when using mowing 

heads.

WARNING

Wear face protection and make sure it is 

a good fit. Face protection alone is not 

sufficient to protect the eyes.
Wear "personal" sound protection, e.g. 

ear defenders.
Wear a safety hard hat for thinning 

operations, when working in high scrub 

and where there is a danger of head 

injuries from falling objects.

STIHL can supply a comprehensive 

range of personal protective equipment.

Clothing must be robust 

but allow complete free

-

dom of movement. Wear 

close-fitting clothes such 

as a boiler suit, not a 

loose jacket.

Wear safety boots with 

steel toe caps and non-

slip soles.

To reduce the risk of eye 

injuries, wear close-fit

-

ting safety glasses in 

accordance with Euro

-

pean Standard EN 166. 

Make sure the safety 

glasses are a snug fit.

Wear sturdy protective 

gloves made of a resist

-

ant material (e.g. 

leather).

Содержание FS 56













































Отзывы: