Stihl FS 56, Инструкция по эксплуатации

Страница: 23 / 44

FS 56, FS 56 R, FS 56 C, FS 56 RC
English
21
The type and style of the harness
depend on the market.
The use of the harness is described in
the chapter on "Approved Combinations
of Cutting Attachment, Deflector, Handle
and Harness".
Shoulder strap
N
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N
Balance the machine.
Full Harness
N
Put on the harness (1) and close the
locking plate (3).
N
Adjust the length of the strap – with
the machine attached, the
carabiner (2) must be about a
hand's width below your right hip.
N
Balance the machine – see
"Balancing the Machine".
The type and style of the harness and
carabiner (spring hook) depend on the
market.
The carrying ring is integrated in the
control handle on loop-handled units–
see "Main Parts". Loop-handled units do
not need to be balanced.
Attaching the unit to the harness
N
Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
Fitting the Harness
3
002BA228 KN
2
1
Balancing the Machine
1
2
1
2
002BA31
1 KN