Stihl FR 480 C, Инструкция по эксплуатации

Страница: 6 / 44

FR 480 C
English
4
– Always connect the unit to a
properly installed wall outlet.
– Make sure the insulation of the
connecting cord and plug is in good
condition.
– After using the power supply unit,
unplug it from the wall outlet.
12V/24V Charging Cable
– Use only original STIHL 12V/24V
charging cables.
– Connect the 12V/24V charging
cable only to a vehicle outlet with
the voltage specified on the rating
plate.
– Do not use a 12V/24V charging
cable with a damaged housing or
damaged connecting cord.
– Do not open.
– Store out of the reach of children.
– Protect from dampness.
– Store in a dry place, indoors only.
– Operate only in a dry location.
– Operate at ambient temperatures
between 0°C and + 40°C.
– Allow the 12V/24V charging cable to
cool down normally – do not cover.
– Do not operate on an easily
combustible surface (e.g. paper,
texiles) or in an easily combustible
environment –
risk of fire .
– Do not operate in a hazardous
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts.
– In the event of smoke or fire in the
12V/24V charging cable, disconnect
it from the vehicle outlet
immediately.
– Check the 12V/24V charging cable
for damage at regular intervals. If
damage is found, immediately
disconnect the power supply
adapter from the vehicle socket to
avoid the
risk of electrocution.
– Never use damaged cords and
plugs or connecting cords that do
not comply with regulations.
– Never jerk the connecting cord to
disconnect the adapter from the
vehicle socket. To disconnect,
grasp the adapter, not the cord.
Have a damaged connecting cord
repaired by an experienced
electrician.
– Do not use the 12V/24V charging
cable for any other purpose.
– To reduce the risk of stumbling,
position and mark the 12V/24V
charging cable so that it cannot be
damaged or endanger others.
To reduce the risk of electric shock:
– Always connect the 12V/24V
charging cable to a properly
installed vehicle socket.
– Make sure the insulation of the
connecting cord and plug is in good
condition.
– After using the 12V/24V charging
cable, unplug it from the vehicle
socket.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Sturdy shoes with non-slip soles may be
worn as an alternative only when using
mowing heads.
Warning! A face shield alone does not
provide adequate eye protection.
Wear hearing protection, e.g. earplugs
or ear muffs.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi-
nation, do not wear a
work coat.
Avoid clothing that could get
caught on branches or brush or
moving parts of the machine. Do
not wear a scarf, necktie or
jewelry. Tie up and confine long
hair (e.g. with a hair net, cap, hard
hat, etc.).
Wear steel-toed safety
boots with non-slip soles.
Wear a safety hard hat
for thinning operations,
when working in high
scrub and where there is
a danger of head injuries
from falling objects. To
reduce the risk of injury
from thrown objects,
always wear a face shield
and safety glasses.