Stihl FR 480 C, Инструкция по эксплуатации

Страница: 33 / 44

FR 480 C
English
31
The starter mechanism consists of:
– Starter motor
– Spring
– Starter gear
N
Have the starter gear lubricated
every 12 months.
Servicing and repair work on the starter
mechanism may be performed only by
servicing dealers.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N Dispose of fuel properly in
accordance with local
environmental requirements.
N
Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Remove, clean and inspect the
cutting tool.
N Thoroughly clean the machine –
pay special attention to the cylinder
fins and air filter.
N Store the machine in a dry and
secure location – out of the reach of
children and other unauthorized
persons.
N Store at a temperature between
+ 10°C and + 25°C.
N Use a sharpening file (special
accessory) to sharpen dull cutting
attachments. In case of more
serious wear or nicks: Resharpen
with a grinder or have the work done
by a dealer – STIHL recommends a
STIHL servicing dealer.
N
Resharpen frequently, take away as
little material as possible: two or
three strokes of the file are usually
enough.
N Resharpen the cutters (1) uniformly
– do not alter the contour or the
parent blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions.
Rewind Starter Storing the Machine Sharpening Metal Cutting
Blades
2
1
002BA083 KN
2
1
2
2
1 1