Edition
2016
Workshop Manual
PARK 120 - PARK 220
Chapter
Page
21
2.2
Replacing the link arm
Remove the link arm, as follows:
Warning!
Support the machine safely, on the rear side of the frame and on the front frame
near the arm, to ensure it does not roll over. Keep it lifted using a jack or wooden
planks.
B
A
1. Unscrew the bolt (A-17 mm wrench.
2. Unscrew the bolt (B-17 mm wrench).
3. Replace the link arm and then mount it together
in reverse order.
4. If it is difficult to fit bolt (A) during assembly, lift
up the front frame for an easier mounting of
the bolt.
