COmmISSIONING
Commissioning
30
| STE
www.stiebel-eltron.com
f
f
Press the button on the start screen to open the main
menu.
f
f
Press the button.
f
f
Press the “System settings” menu.
f
f
Press the “Date/time” menu.
f
f
Make the required changes.
f
f
Confirm the selection.
either
f
f
Press the button to return to the higher ranking
menu.
or
f
f
Press the button to return to the main menu.
5.3 Network connection
Note
f
f
Please note that, for example, firewalls and faulty
connections may cause problems that prevent full
functionality.
f
f
If problems occur, contact your internet provider or
network administrator.
The appliance can be used to monitor the heating system via the
internet. For monitoring, you will need an internet connection,
a router and the Internet Service Gateway (ISG). Refer to the ISG
operating and installation instructions. Use of the ISG is only pos-
sible in conjunction with dynamic assignment of the IP address.
5.3.1 Connecting to the internet
f
f
Connect a patch cable to the RJ45 connector (see chapter
“Commissioning / Connecting to the internet” in the operat-
ing and installation instructions for the heat pump).
5.3.2 Network settings
Note
f
f
If multiple heat pumps are installed, the network
settings must be entered separately for each heat
pump.
Note
f
f
If settings are required on a router or other network
component, contact the network administrator.
The connection can be established via DHCP or a static IP address.
Ensure that you select the same connection for all heat pumps.
f
f
Press the button on the start screen to open the main
menu.
f
f
Press the button.
f
f
Select the “System settings” menu.
f
f
Select the “Network settings” menu.
Connection via DHCP
Note
f
f
Use dynamic assignment of the network address if
the heat pump is integrated in a network.
f
f
Slide the switch to the corresponding position.
f
f
Enter the required information in the corresponding
fields.
either
f
f
Press the button to return to the higher ranking
menu.
or
f
f
Press the button to return to the main menu.
0