EN
GL
ISH
www.stiebel-eltron.com
DHE Connect | DHE Touch |
95
INSTALLATION
Installation options
13.12 Pivoting appliance cover
The appliance cover can be turned round for undersink instal-
lation.
D
00000
53
28
7
f
f
Remove the programming unit from the appliance cover by
pressing the locking hooks and removing the programming
unit.
f
f
Turn the appliance cover (not the appliance) and refit the
programming unit. Push the programming unit home in par-
allel until all locking tabs engage. When engaging the locking
tabs, apply counter-pressure by pushing against the appli-
ance cover from the inside.
WARNING Electrocution
All 4 locking tabs on the programming unit must click into
place. The locking tabs must be complete and undam-
aged. If the programming unit is not inserted correctly,
protection of users against contact with live components
cannot be ensured.
f
f
Insert the connecting cable plug of the programming unit
into the PCB (see chapter "Commissioning / Initial start-up").
f
f
Hook the appliance cover in at the bottom. Pivot the appli-
ance cover up to the back panel.
f
f
Secure the appliance cover.
f
f
Fit the cover on to the appliance cover.
13.13 Operation with preheated water
You can restrict the maximum inlet temperature by installing a
central thermostatic valve.
13.14 Registering the mini wireless remote control
The mini wireless remote control learning can be performed via
the programming unit; see chapter "Settings / Service / Wireless /
Connect other wireless subscribers".
However, if the programming unit is used outside of the appliance
(in accessories), open the appliance and perform learning as de-
scribed below for mini wireless remote control learning.