EN
GL
ISH
www.stiebel-eltron.com
DHE Connect | DHE Touch |
85
INSTALLATION
Installation
!
Material losses
The strainer must be fitted for the appliance to function.
f
f
When replacing an appliance, check whether the
strainer is installed.
Installing the appliance
Note
If you are installing the appliance with flexible water
connections, also secure the back panel with a screw.
D
00000
53
29
1
1
2
1 Cable entry installation aid
2 Cable grommet
Use the installation aid for easier wiring access through the cable
grommet (see plastic parts set supplied).
f
f
Remove the cable grommet from the back panel.
f
f
Pull the cable grommet over the cable sheath of the power
cable. For large cable cross-sections, enlarge the hole in the
cable grommet if necessary.
D
00000
53
27
4
f
f
Remove the transport protection plugs from the water
connections.
f
f
Bend the mains connection cable 45° upwards.
f
f
Route the mains connection cable and cable grommet
through the back panel from the rear.
f
f
Install the appliance on the threaded studs of the wall
mounting bracket.
f
f
Push the back panel firmly against the wall. Lock the fixing
toggle by turning it 90° clockwise.