STF-Filtros FMA-3000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 41

Installation, Operation and Maintenance Manual – FMA 3000
Ref: 3000/T/6/VH 22
10. – MAINTENANCE INSTRUCTIONS.
 Disconnect the filter from the power supply before performing any maintenance
operation.
 Make sure the filter is depressurized before loosening the screws.

Avoid splashing and water loss, thus minimizing the risk of staff electrocution or slipping
as well as the damage that moisture can cause to your device.
 After completing the treatment, reset the protective covers of the transmission
mechanism.
 The manual cleaning of the filtering cartridge shall be performed by using pressurized
water. Acid or other chemicals shall be used if necessary. It should be performed in
accordance with the relevant instructions for the material in question without endangering
the workers or those around them.

Drain the device during prolonged periods of inactivity.
NOTE
ALWAYS OPEN AND CLOSE THE VALVES SLOWLY AND GRADUALLY.