ATTACH BLACK WIRES TO SWITCH
Cut two 4" black jumpers, strip roughly 1/4" of
insulation from the end of the wires, and tin the
freshly exposed wire. Wrap the wires through the
eyelet of the middle solder lug on the switch and
solder them.
4
4
INSTALL JUMPERS ON THE SWITCH
Cut two 4" white jumpers, strip roughly 1/4" of
insulation from the end of the wires, and tin the
freshly exposed wire. Wrap the wires through the
eyelet of one of the outside solder lugs on the
switch and solder them. Even though it's called
”pushback wire” you must strip the insulation to
make a solid solder connection.
3
3
