ADD HEAT SHRINK TO ONE LEG
Slide another 1" length of heat shrink over one of
the black wires that you just soldered to the new
switch.
7
7
6
6
FIND CAPACITOR C8
The location of this capacitor varies by model. To
find out which model you have, locate the version
code. The code (similar to “EC3003 REV B”) is printed
in large white letters along the bottom of the board.
The last letter in that code (A, B, C, D, or E) is the
version you have. Now locate capacitor C8. It will be
either yellow or green.
On version A or B
, C8 will be
located between the volume and tone pots. On this
version, desolder and lift the leg of C8 that is closest
to the edge of the board.
On version C, D, or E
, C8
is located between the tone and sustain pots. On
this version, desolder and lift the leg of C8 that is
closest to the sustain pot.
