DISASSEMBLE THE PEDAL
Remove the four screws that
secure the back of the pedal
housing. As you are removing
the back panel, be careful not
to catch the circuit board on
any of the wires. If your pedal
has a glued LED light, do not
remove it. Pull the knobs off of
the front of the pedal, unscrew
the mounting nuts for the
potentiometers and the switch,
and unscrew the mounting nuts
for the instrument and power
jacks on the top panel. Set all of
the components to the side for
now.
AMPLIFIER
VOLUME
TONE
SUSTAIN
1
1
