INSTALL THE WHITE WIRES
Solder the free end of one of the white wires to the
hole vacated by the lifted leg of C8, and solder the
free end of the other white wire to the hole vacated
by the lifted leg of R5.
REASSEMBLING AND TESTING
Install the new switch into its hole first, and then
reinstall the rest of the components back in to the
pedal housing. Re-attach the back panel with the
four mounting screws. Plug in your guitar and an
amp, and take your Big Muff for a test drive. When
the tone bypass switch is engaged, the pedal
should be noticeably louder. If you experience
intermittent signal or other irregularities, pull the
back panel off the pedal again and inspect your
solder joints.
13
13
Chassis side view
14
14
