27
TC1044SCPA
4580D
4580D
ON
ON
ON
ON
ON
ON
ON
ON
.1J63
.1J63
1J63
1J63
503 0D
503 0D
WD 12-2
SOLDER
POTS
TO PCB
Temporarily attaching the pots and footswitch to
the pedal housing will help to keep things steady for
soldering them to the PCB.
Lay the PCB/breakout board component side up
over the pots. The shaft of the footswitch will help to
support the PCB. Manuever the lugs of the pots and the
PCB until the lugs of the pots slip into their appropriate
holes in the PCB. Once all the lugs have popped
through the board, solder them in place.
Remove the nuts and washers on the pots to free the
PCB group of parts from the housing. Reattach the nuts
and washers to pots and switch.
12
12
