Main Wing
(continued)
45. Fit and tack glue rib W5 to the next full depth slot in the spar,
LEFT
of rib
W4.
46. Fit and tack glue trailing edge part W6a to the rear of ribs W3, W4, and W5.
47. Fit and tack glue gusset W6b to trailing edge and rib W3.
48. Fit and tack glue the leading edge web W7 to the front of ribs W3, W4, and
W5.
Note: Arrows on W7 should be oriented closest to W3 and wing
CENTER section.
49. Fit and tack glue sub-rib W8 to the slots in the spar and leading edged web
between ribs W3 and W4. Tack glue with medium CA.
50. Fit and tack glue sub-rib W9 to the slots in the spar and leading edged web
between ribs W4 and W5.
51. Fit and tack glue tip rib W10 to outermost slots in main spar and leading
edge. The
REAR
of rib W10 will butt up against spar W2 and should receive
no glue until the wing tip sheeting is installed in later assembly steps.
Build Instructions
S-Pou! 300
- Build Instructions © 2011 Stevens AeroModel, all rights reserved.
!
Page 18
□ □
□ □
□ □
□ □
□ □
□ □
□ □
