STERWINS 40VPS2-24.1, Инструкция по сборке, использованию и обслуживанию

Страница: 351 / 379

351
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
• Check the loose fasteners and damaged parts (e.g. cracks in the saw blade) before each
operation.
• Check the product, its battery pack and charger as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
• Double check that the accessories and attachments are properly fi xed.
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
it down.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
• Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly.
• We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.
• Operate the product only at reasonable hours – not early in the morning or late at night
when people might be disturbed.
• Avoid using the product in bad weather conditions, especially when there is a risk of
lightning. Do not operate the product in poor lighting. The operator requires a clear view
of the work area to identify potential hazards.
• Use of hearing protection reduces the ability to hear warnings (shouts or alarms).
The operator must pay extra attention to what is going on in the work area. Do not get
distracted, and always concentrate on the task.
• Operating similar tools nearby increases both the risk of hearing injury and the potential
for other persons to enter your work area.
• Keep fi rm footing and balance.
• Do not overreach. Overreaching can result in loss of balance. Always be sure of the
footing on slopes.
• Walk, never run. Keep all parts of your body away from any moving part.
• Never run the product without the proper equipment attached.
• Do not modify the product in any way or use parts and accessories that are not
recommended by the manufacturer.
• Never stand below a branch that is being sawed.