background image

Maintaining the Monitor

Vividimage

®

 4K Surgical Display

OPM3000, Rev. C

Operation Manual

16

Maintaining the Monitor

Cleaning the Monitor

STERIS surgical displays used in close proximity to the surgical field may result in the display being exposed to
infectious materials. Displays should be disinfected and cleaned in accordance to hospital policy and using
STERIS prescribed cleaners.

STERIS displays feature an optical acrylic panel specially coated for superior anti-reflective properties which can
be damaged (scratched and/or clouded) if improper cleaning solutions are used. The viewing area must be free
of any deposit or residue that could obscure visualization of procedure guidance information. Some disinfection
and cleaning agents may leave a residue and it is recommended that the viewing area of the surgical display be
wiped with a damp then dry microfiber cloth after disinfection and cleaning or as needed.

The following DebMed products have been tested on the panel and can be used for cleaning and/or disinfecting,
according the product's labeling, to ensure the panel does not become compromised:

To clean the display:

1.

Turn off the main power switch, which is on the back of the monitor.

2.

Clean with a soft cloth moistened with a DebMed Coverage product.

3.

Wipe the display area and enclosure.

4.

Wipe the display area dry with a clean soft cloth. 

NOTE: 

If the STERIS products are not available, a mixture of 50% methyl or ethyl alcohol and 50% water

can be used to clean both the panel and monitor cabinet. Use a clean, soft, microfiber cloth to apply the
STERIS products and/or the alcohol and water solution to the panel and cabinet. Do not spray fluids
directly onto the panel or any system component.

Storing the Monitor

If the display will not be used for an extended period of time, remove the power plug from the AC outlet (if
applicable and accessible). Store in its original carton if available. Store in a dry location in temperatures between
-4 and 140 degrees Fahrenheit, as listed in “Specifications” on page 18.

Coverage

®

 Spray HB Plus 

Ready-to-Use Disinfectant Cleaner
Product # 1624

Coverage

®

 Spray TB Plus

Ready-to-Use Disinfectant Cleaner
Product # 1629

Содержание Vividimage RLM274K




























Отзывы: