manualshive.com logo in svg

Steris Basil 4700, Руководство по обслуживанию

Поделиться
Скачать
Steris Basil 4700 Скачать руководство пользователя страница 118

3-7

764333-098

• Alkaline  Tank

Alkaline tank dump valve opens and sump is
filled. When sump is full, alkaline tank dump
valve is closed and sump is drained using
manual sump draining sequence. This
sequence is repeated until sump does not fill
within tank drain time.

If a door is opened or ALK. TANK button is
pressed again, sequence is aborted.

Once tank empty, display shows ALKALINE
TANK EMPTY.

• Acid  Tank

Acid tank dump valve opens and sump fills.
When sump is full, acid tank dump valve closes
and sump is drained using manual sump
draining sequence. This sequence is repeated
until sump does not fill within tank drain time.

If a door is opened or ACID TANK button is
pressed again, sequence is aborted.

Once tank is empty, display shows ACID
TANK EMPTY.

• Cool down tank:

Cooldown tank is drained as per guaranteed
cooldown tank option section. This sequence
cannot be aborted.

NOTE: In this mode timers (filling/draining…)
are set according to programmed Service Mode
values. 

Содержание Basil 4700










































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды