Stephen Technologies Co.,Limited
www.stephen-tele.com
Step 5
write
(Optional) Save your entries in the configuration file.
To disable flow control, use the
l2-control port
port-number
flow-control disable
back-pressure disable
global configuration command.
II. WEB configuration:
Click Port Controls, Select Port, Specify Flow Control and Back Pressure state, then click
Apply.
5.2.4 Setting the Ethernet Port Broadcast Suppression
You can use the following commands to restrict the broadcast traffic. Once the broadcas
traffic exceeds the value set by the user, the system will maintain an appropriate broadcas
packet number by discarding the overflow traffic, so as to suppress broadcas storm, avoid
suggestion and ensure the normal service. The parameter is taken the maximum wire speed
ratio of the broadcast traffic allowed on the port. The smaller of the ratio is, the smaller the
broadcas traffic is allowed.
I. CLI configuration: