Stenograph Luminex Captioner Student Edition Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 50

Stenograph Luminex Captioner Student Edition Скачать руководство пользователя страница 18

12

2018 Stenograph, L.L.C. All Rights Reserved.

12

Luminex Captioner/Student User Guide

Chapter 3 Hardware Features

·

battery with a full green gauge indicates the main battery is fully charged.

·

the battery level drops, the green bar becomes smaller.

·

a battery with a partial yellow gauge indicates the battery is low.

·

a battery with a short red gauge indicates the battery is almost completely drained. The

battery icon flashes on and off.

·

a battery with black and yellow running stripes indicates the Luminex is plugged into

the AC adapter/charger and the batteries are charging.

Tilting Screen Battery Messages

The Tilting screen displays three progressive warning messages along with a beep as the main

battery level becomes low:

·

Battery, Danger -- Battery Low

.

·

Battery, Danger -- Recharge Battery Now

.

·

Battery, Battery Dead -- Switching To FailSafe...

Communication Port

There is one USB port on your Luminex Captioner/Student Edition which provides connection access

for the USB realtime cable between the writing machine and the computer. To use the micro USB

cable for realtime writing or reading notes from Memory, you must install the

Luminex

Captioner/Student Edition USB driver

on your computer. The USB port is clearly marked on the

back of the writing machine.

Powering the with the USB Cable

When the Luminex is connected to your computer for realtime via the micro USB cable, the main

battery continues to power the writing machine. In most situations, the USB port can power the

Luminex and may charge the battery when the main battery is not fully charged. When the main

battery becomes low while using the micro USB connection, low battery messages display on the

Luminex, but all features continue to operate. The USB port provides power to run all the Luminex

components except Bluetooth communications. When powered by the micro USB port, the Luminex

tilting screen displays at about half of the Backlight brightness setting.
To use the micro USB cable, you must install the Luminex USB driver on your computer. See

Install

the Luminex Captioner/Student Edition USB Drivers

for instructions on loading the driver.

4

4

«
...
16
17
18
19
20
...
»

Содержание Luminex Captioner Student Edition



















































Отзывы:

Нет отзывов