Stels UTV800 Скачать руководство пользователя страница 71

Страница: 71 / 139

- 68 -

! WARNING

Improper care when refueling.

POTENTLAL HAZARD

Fuel can spill, which can cause a

fire and severe injury.

WHAT CAN HAPPEN

Fuel expands when it heats up.

If the fuel tank is overfilled, fuel

could spill out due to heat from the

engine or the sun.

Do not overfill the fuel tank. Be

careful not to spill fuel, especially

on the engine or exhaust pipe.

Wipe up any spilled fuel immediately.

Be sure the fuel tank cap is closed

securely.

HOW TO AVOID THE HAZARD

Accelerator pedal

Check to see that the accelerator pedal

operates correctly. It must operate

smoothly and fully spring back to the

idle position when released. Have an

dealer repair as necessary for proper

operation.

Seat belts

Make sure that both seat belts are not

frayed or damaged.

The seat belt must move smoothly

when pulled. The latch plate should

click securely into the buckle and

release when the release button is

pushed firmly. Wash off any dirt or mud

which could affect operation. Have an

dealer repair as necessary for proper

operation.

Содержание UTV800












































































































































Результаты поиска

Содержание UTV800

Отзывы:

Похожие инструкции для UTV800

Бренды по названию

Популярные бренды

Stels UTV800, Руководство пользователя

Результаты поиска

Содержание UTV800

Отзывы:

Похожие инструкции для UTV800

Бренды по названию

Популярные бренды