Stels UTV800 Скачать руководство пользователя страница 53

Страница: 53 / 139

- 75 -

can reduce the chance of injury then

you drive. The following suggestions

will help you choose the proper driving

gear.

Helmets and eyes protection

Your helmet is your most important

piece of driving gear because it offers

the beat protection against head

injuries. A helmet should fit your head

comfortably and securely.

An open-face helmet offers some

protection, but a full-face helmet offers

more. Regardless of the style, look for a

DOT(Department of Transportation)

sticker in any helmet you buy. Always

wear a face shield or goggles to protect

your eyes and help your vision.

! WARNING

Operating this without wearing an

approved motorcycle helmet, eye

protection and protective clothing could

increase your chances of head or eye

injury, possibly death in the event of

severe accident.

Always wear approved motorcycle

helmet that fits properly and wear eye

protection(goggle or face shield),

gloves, boots, long-sleeved shirt or

jacket and long pants.

Содержание UTV800












































































































































Результаты поиска

Содержание UTV800

Отзывы:

Stels UTV800, Руководство пользователя, Страница: 53 / 139

Результаты поиска

Содержание UTV800

Отзывы: