Stels UTV800 Скачать руководство пользователя страница 60

Страница: 60 / 139

- 82 -

! WARNING

Operating this UTV800 on paced

surfaces may seriously affect

handling and control of the UTV800,

and may cause the vehicle to go out

of control.

Never operate the on any paved

surfaces, including sidewalks,

Operating this UTV800 on paced

surfaces may seriously affect

handling and control of the UTV800,

and may cause the vehicle to go out

of control.

Never operate the on any paved

surfaces, including sidewalks,

driveways, parking lots and strata.

Keep hands and feet on controls

Always keep both hands on the

steering wheel and both feet on

controls. When driving your UTV800, it

is important to maintain your balance

and control of the UTV800. Removing

hands or feet away from the controls

can reduce your ability to react and

control the off highway recreational

vehicle.

Содержание UTV800












































































































































Результаты поиска

Содержание UTV800

Отзывы:

Stels UTV800, Руководство пользователя, Страница: 60 / 139

Результаты поиска

Содержание UTV800

Отзывы: