Stels UTV800 Скачать руководство пользователя страница 126

Страница: 126 / 139

123

Remove access panel.

1. Coolant reservoir
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.
NOTE: When checking level at
temperature lower than 20

℃

,it m ay be

lightly lower than MIN. mark. Add
coolant up to MAX. mark if required.
Use a funnel to avoid spillage.

Do not

overfill.

Properly reinstall and tighten filler cap
and reinstall access panel.

If the coolant is added in the coolant
reservoir, check the level in the radiator
too. Add coolant if necessary.

WARNING

In order to avoid getting
burned, do not remove the
radiator cap if the engine is
hot.

NOTE: A cooling system that frequently
requires coolant is the indication of
leaks or engine problems. See an
authorized dealer.

Coolant Replacement

WARNING

In order to avoid potential
burns, do not remove the
radiator cap or loosen the
coolant drain plug if the the
engine is hot.

Open the front access panel and
remove the radiator cap.
Unscrew the coolant drain plug and
drain the coolant into a suitable

Содержание UTV800












































































































































Результаты поиска

Содержание UTV800

Отзывы:

Stels UTV800, Руководство пользователя, Страница: 126 / 139

Результаты поиска

Содержание UTV800

Отзывы: