stellar labs Slider50, Руководство пользователя

Страница: 31 / 62

25 Installation 25
Note: See Mounting Kit PN 58597 in this chapter for an overview of the mounting process.
Bolt each tie-down angle to the underside of each mounting plate located on the outside of
the main rails of the base (both sides):
Step 2: Bolt Tie-Down Angles to Mounting Plates.
for proper bolt tightness.
Note: See torque chart at beginning of chapter
for proper bolt tightness.
Note: See torque chart at beginning of chapter Note: See torque chart at beginning of chapter
2
1
4
2
2
1
2
1
5
3
2
3
the middle mounting plate.
secured to any of the holes on
Note: This t
3
the middle mounting plate.
secured to any of the holes on
Note: This tie-down angle can be
5
2
3
58591PC 5
58590PC 4
6294 3
6538 2
PN ITEM
5199 1
ANGLE FORMED 6.00X8.00X.50WX9.00 SLIDER65 MTG 58591PC
ANGLE FORMED 6.00X8.00X.50WX22.00 SLIDER65 MTG 58590PC
NUT 1.00-8 HHGR8 NYLOC 6294
WASHER 1.00 SAE FLAT YELLOW GR8 6538
PN
CAP SCR 1.00-8X3.00 HHGR8 5199
ANGLE FORMED 6.00X8.00X.50WX9.00 SLIDER65 MTG
ANGLE FORMED 6.00X8.00X.50WX22.00 SLIDER65 MTG
NUT 1.00-8 HHGR8 NYLOC
WASHER 1.00 SAE FLAT YELLOW GR8
DESCRIPTION
CAP SCR 1.00-8X3.00 HHGR8
ANGLE FORMED 6.00X8.00X.50WX9.00 SLIDER65 MTG
ANGLE FORMED 6.00X8.00X.50WX22.00 SLIDER65 MTG
WASHER 1.00 SAE FLAT YELLOW GR8
QTY
4
2
16
32
16