stellar labs Slider50, Руководство пользователя

Страница: 30 / 62

24 Slider50 Owner’s Manual
a. Visually inspect the truck and look for any potential issues. For example: Clearance prob-
lems, cross members extending too high, insufficient room in front of the Slider for tarpers,
exhaust manifolds, etc., or insufficient room in the rear to allow for bumper selection. Note:
Stellar Industries recommends allowing 12” behind the start of clear truck frame for installation
of a tarping system.
b. Be sure to square the Slider on the truck frame to allow for proper measurement. The front of
the hooklift needs to be at least 2.50” behind the cab or any equipment mounted behind
the cab.
Every hooklift installation is unique. However, certain guidelines exist that apply to every
model. Listed below is a general set of chronlological steps that may be followed when
installing a Stellar Hooklift. If any questions arise during the installation process, feel free to
contact your local dealer or Stellar Customer Service at 800-321-3741.
Step 1: Set the hooklift onto the truck frame.
Installation Note
Truck Frame
Front of
Hooklift
Back of Truck Cab
or Mounted
Equipment
(Such as a
Tarper Tower)
At Least
2.5”