stellar labs 4-BY-2-GL, Инструкция по установке и эксплуатации

Страница: 12 / 34

INS_GALAXY SERIES_BY REV C
Page 12
6 - GLASS FRAME ASSEMBLY
Upper Groove
Quality
Suction Cup
Lower Groove
A. GLASS FRAME ASSEMBLY IDENTIFICATION
Figure 6A
CAUTION: TO PREVENT GLASS FRAME ASSEMBLY FROM FALLING FROM FIREPLACE AND BECOMING DAMAGED,
FOLLOW THE INSTRUCTIONS EXACTLY WHEN REMOVING AND INSTALLING GLASS FRAME ASSEMBLY.
STOP: DO NOT OPERATE THIS FIREPLACE WITH THE GLASS REMOVED, CRACKED OR BROKEN. REPLACEMENT OF
GLASS ASSEMBLY SHOULD BE DONE BY A LICENSED OR QUALIFIED SERVICE PERSON.
WARNING: DO NOT REMOVE GLASS ASSEMBLY WHEN HOT!!!!
NOTE: GLASS REMOVAL AND INSTALLATION MUST BE PERFORMED WITH TWO PEOPLE.
NOTE : Glass must be removed using quality suction cups.
DO NOT attempt to remove the glass without using proper suction cups.
LOWER FILLER STRIP SITS OVER GLASS CLIPS
GLASS CLIP
GLASS
Figure 6B.1
NOTE: IN CASE OF CHIPPED OR BROKEN GLASS
Due to the size and sensitivity of shipping the glass separately, it is best to have the replacement glass cut locally if needed.
Have your local dealer assist you with contacting Stellar Hearth Products directly to get the proper glass specifications.