STEIN 300 916 001 Скачать руководство пользователя страница 12

Страница: 12 / 84

STEIN300_Umsetzer_04_GB.doc / 03.2020

WARNING

The protective guards of the lift the station may not be removed in automatic
operating mode.

There is a risk of injury if the system is operated without protective guards.

All protective equipment must always be fully installed and functioning. The pro-
tective guards may only be removed by the maintenance personnel during
maintenance and repair work.

If the transfer unit is used improperly, the following injuries can result:

WARNING

Crushing due to:

Jamming occurring between the components of the transfer unit that move line-

arly

Jamming occurring between the WT and the guide track or rails,

Getting drawn in or clothing getting wound around components.

The lift station may only be operated with or while enclosed by protective guards.

CAUTION

Hazardous areas may arise while the conveyor is in operation. There is a risk of
crushing due to

jamming between the workpiece carriers,

being drawn in and clothing being wound around components, or

the characteristics of the product being transported.

Fig.

3-2

Possible areas for
- jamming,
- getting drawn in or cloth-
ing wound around com-
ponents.

Содержание 300 916 001





















































































Результаты поиска

Содержание 300 916 001

Отзывы:

Похожие инструкции для 300 916 001

Бренды по названию

Популярные бренды

STEIN 300 916 001, Руководство по эксплуатации

Результаты поиска

Содержание 300 916 001

Отзывы:

Похожие инструкции для 300 916 001

Бренды по названию

Популярные бренды