Stegmaier-Haupt TV 6.2, Руководство пользователя

Страница: 23 / 42

TV6.2 23
4 Adjustments
2nd
Command value
A correction value of max. ±10V can be applied across the connector X1:32a
(X1:17).
The input resistance is 100 kΩ .
If the polarity is the same as that of X1:4 (command value), the correction vol-
tage will be added.
This input is bridged with a resistance of 1 kΩ at R246.
If the 2
nd
command value input is used, the resistor R246 must be removed.
Output X1:28c (X1:3) +10V/5mA
Output X1:24c (X1:5) -10V/5mA
Output X1:18c (X1:8) device ground GND
Input X1:32a (X1:17) correction value 0 to ±10V
The rotation direction is changed by means of the relay contacts d1 and d2.
No correction if d1 and d2 are open.
Correction value adjustment by means of poti P
corr.
Potentiometer resistance 5 to 10kΩ .
Command value voltage 0 to ±10V.
Switch S2:K4 closed.
Input X1:32a (X1:17) command value
Input X1:18c (X1:8) command value
Voltage X1:26c - X1: 18c 0 to ±10V
Input resistance 100kΩ.
Differential input if the switch S2:K4 is open.
If the correction input is used as differential input,
the device ground (X2:23) must be earthed.
Command value with command value current (0 to 20mA)
1 st command value
For converting a command value current of 0 to 20mA a resistor of 500 Ω must
be soldered-in at R134.
2
nd
command value
For converting a command value current of 0 to 20mA a resistor of 500 Ω must
be soldered-in at R134.