stefani Triple Undersink, Руководство по установке

Страница: 8 / 12

8
INSTALLATION INSTRUCTIONS STEP 3
MOUNTING THE FAUCET
1. Remove the locking nut from the faucet shaft.
2. Place Small Rubber Washer, Chrome Cover Plate and Large Rubber Washer on the
shaft of faucet. Insert faucet shaft into the hole on the counter/sink top.
3. Place Round Plate and Locking Washer on under counter/sink side of the faucet
shaft. Tighten with Locking Nut and ensure faucet handle is pointing in the desired
direction.
4. Insert the ¼ inch connection piece onto the shaft of the faucet and push in until it
fully stops, pull slightly to seal the connection
5. Insert the ¼ inch tubing from the outlet of the filter housing into the connection piece
until it fully stops, pull slightly to seal the connection.
6. Turn on the water supply and allow the water to run for 10 minutes before enjoying
fresh water from your purification system every day.
7. Check thoroughly for any leaks
counter
Small Rubber Washer
Chrome Cover Plate
Large Rubber Washer
Round Plate
Locking Washer
Faucet and 1/4” Tube
Connector
1/4” Tube