10
CAUTION !
Please use this metal piece as a guage to varify if the
IN
Met
al piece fits he
re
Must be on IN side
Housing side
3. Remove and discard filter cartridge.
4. Do not use abrasive cleanr, rinse thoroughtly.
5. Remove plastic wrapping from the new filter cartridge before placing into filter housing.
Place new cartridge into filter housing. Ensuring post in bottom of filter housing is located in
the centre of filter cartridge.
6. Screw filter housing onto manifold and tighten by wrench until the O-ring between the head
and housing is not visible. Use the depth gauge washer to ensure the housing has been
sufficiently tightened as shown on the instructions included with the wrench
7. Open faucet by puling lever up. It should toggle into place and stay open.
8. Turn water on at the mains and then at the mains connection valve. Allow water to run
through system for several minutes to expel air bubbles trapped in the system during the
filter cartridge change. Water may appear milky. These are only tiny air bubbles and some
contaminants being expelled from the new filter cartridge. Flush water until it runs clear.
LOW /NO MAINTENANCE REQUIRED: The only requirement is changing the filter cartridge.
Maximum filter cartridge life expectancy is 6-8 months. The life and performance of filter
cartridge may vary depending on volume and quality of the incoming water supply being
filtered. Your filter cartridges may need replacing earlier than 6-8 months if you notice a
reduce volume or flow from the filter faucet, or the return of an unpleasant taste/odour to the
filtered water. Please contact Stefani Australasia Pty Ltd on (08) 9350 6178 or email to
[email protected] if you require any assistance.
Helpful hint: After carrying out a filter cartridge replacement or
any maintenance on filter system, we recommend you observe
system from possible water leaks for a day after filter cartridge
replacement. Seals and plumbing to the system may have
disturbed.
Содержание Triple Undersink
Страница 1: ......
