SBM-500
SBM-
500 Operator’s Manual
3
1. GENERAL INFORMATION
1.1. Application
The SBM-500 is a stationary machine designed to bevel plates made of carbon steel,
stainless steel, or aluminum alloys. The workpieces can be machined at an angle of
15
–60° and to the bevel width of up to 30 mm (1-3/16″).
Accessories allow beveling pipes with outer diameters of 50
–150 mm (2–6″) and
beveling long plates and narrow plates.
1.2. Technical data
Voltage
3~ 480 V + PE, 50/60 Hz
Power
8 kVA
Spindle rotational speed (without load)
500
–2920 rpm
Feed wheel rotational speed
0.2
–3.5 rpm
Feed speed
0.7
–10.5 ft/min
Table load capacity
100 kg (220 lbs)
Bevel angle (
ß
, Fig. 1)
15
–60°
Maximum bevel width (
b
, Fig. 1)
30 mm (1-
3/16″)
Maximum milling head penetration (
d
, Fig. 1) allowed
per a single pass
4 mm
(5/32″)
Workpiece thickness
3
–100 mm (1/8–4″)
Minimum workpiece length
150 mm
(6″)
Minimum workpiece width
50 mm
(2″)
Protection level
IP 20
Protection class
I
Required ambient temperature
0
–40 °C (34–104°F)
Weight
865 kg (1910 lbs)
Fig. 1.
Bevel dimensions; maximum bevel width depending on the angle
β
15°
30°
45°
60°
b
30 mm
30 mm
30 mm
30 mm
