SBM-500
SBM-
500 Operator’s Manual
13
3.3. Setting the bevel angle and milling head penetration
First, set the penetration of the milling head to zero. If there is a gap between the
vertical base (
1
)
and horizontal base (
2
, Fig. 6a), unlock the lever (
3
). Then, rotate
the knob (
4
) so that the vertical base comes in contact with the horizontal base
(Fig. 6b). Lock the lever in this position.
Fig. 6.
Setting the milling head penetration to zero: incorrect (a), correct (b)
1
3
4
a)
b)
CORRECT
✓
INCORRECT
2
