SM-S-9 XP Operator’s Manual
- 17 -
2017 Version 1.01
1.
Adjusting the laser: Use an M2 Allen wrench
to tighten or loosen the laser adjustment screw
(A) to adjust the laser beam width
. Fig.11
2.
Use a small flat blade screw driver to tighten or
lossen the the direction adjustment screw (B) to
align the laser beam with the actual cut line.
Fig.12
.
3.
Calibrate the saw with the laser by adjusting the
guide plate bevel scale to 0˚ when the laser is
aligned with the appropriate notch on the guide
plate.
Fig.13
.
