SM-S-9 XP Operator’s Manual
- 15 -
2017 Version 1.01
Setting Bevel Angle for Bevel Cuts
Release the lock lever (A) and the wing nut (B) to change the bevel plate angle between 0˚ and
45˚. Once the angle is set, re-tighten the lock and lever and wing nut.
Fig. 7
.
Laser Guide Use and Adjustment
1.
Plug power cord into appropriate
power supply and press the
bottom of the left button (A) to
turn on the laser. Press again to
turn laser off.
Fig.8
.
