SteelMax Rail Runner 2, Руководство оператора

Страница: 20 / 68

Rail Runner 2
Rail Runner 2
– Operator’s Manual
20
Tab. 1. Symbols of connected modules
Symbol Description
Linear oscillator.
Motorized vertical slide (option).
Tracking sensor (option).
Use the knobs to set the required parameters (Tab. 2). Rotate to the right to increase
the value of the parameter. Rotate to the left to decrease the value.
Tab. 2. Parameters shown on the main screen
Parameter Value Description Method of control
0
–5 s
[step: 0.1]
Oscillation dwell time in
left position.
Press and hold and rotate
0
–5 s
[step: 0.1]
Oscillation dwell time in
center position.
Press and hold and rotate
0
–5 s
[step: 0.1]
Oscillation dwell time in
right position.
Press and hold and rotate
0.2
–11.8 cm
0.1
–4.5 in
[step: 0.1/0.01]
Oscillation width.
Press and release (activates )
and rotate
10
–300 cm/min
5
–120 in/min
[step: 5/1]
Oscillation speed
(when the vertical slide
is not connected).
Rotate
Oscillation speed
(when the vertical slide
is connected).
Press and release (activates )
and rotate
0
–300 cm/min
0
–120 in/min
[step: 1/0.5]
Carriage speed.
Rotate
Travel the carriage with
the maximum speed in
the direction set by the
direction switch.
Press and hold when the arc ignition
switch is set to ‘O’
From
–9.9 to +9.9 cm
From
–3.9 to +3.9 in
[step: 0.05/0.02]
Oscillation offset.
Rotate
From
–2.5 to +2.5 cm
From
–1 to +1 in
[step: 0.02/0.01]
Torch height (when the
vertical slide is con-
nected).
Rotate
cm
inch Unit of measure.
Rotate in the correct setup screen.