SteelMax Rail Runner 2, Руководство оператора

Страница: 16 / 68

Rail Runner 2
Rail Runner 2
– Operator’s Manual
16
3.4. Positioning on a curved track
Use the 6 mm hex wrench to loosen four screws ( 1 , Fig. 8), and then put the carriage
on the track. Rotate two roller brackets ( 2 ) to put the rollers into the grooves, and
then set the levers to ON ( 3 ). Next, move the carriage back and forth to make sure
that it moves smoothly. Then, tighten the screws ( 1 ) and use the knob ( 4 ) to engage
the gear with the rack as described in “Positioning on a straight track”.
Fig. 8. Rotating the rollers for a curved track
1
2
2
3