3
4
3.
While the 2nd person is still supporting the
front of the worksurface, attach shared legs
in their proper positions as shown on page
30. The other halves of the leg mounting
plates will stick out from under the
worksurface, but the worksurface will stand
on its own at this point. (See caution on
page 32).
4.
Position the next worksurface, and attach
the tether brackets and half-exposed leg
mounting plates with screws. Continue
working outward from the interior corner,
and attach tie plates where necessary as
shown on page 31.
Page 33 of 38
939504792 Rev D
Tethered System Assembly (cont.)
13.6"
24"
30"
13.6"
NOTE:
Shared legs are always
13.6" from the front edge
of the worksurface, regard-
less of the worksurface depth.
