Page 17 of 38
939504792 Rev D
Adjustable Height
Worksurface Supports
1.
Install extended rear glide assembly. Make sure that
the upward-bent flanges contact the back of the leg
before installing the bolt.
2.
For and end-of-run application, attach one bracket
to each support with four (4) "B" screws as shown.
3.
For a corner or a shared application, attach two (2)
brackets to each support using four (4) "B" screws as shown.
1
2
C-Leg Support
3
Rear Support
Intermediate Support
(or Shared C-Leg Supports)
NOTE:
Remove rear glide from bolt hole,
if necessary, to allow installation
of extended rear glide assembly.
B
B
B
