Page 8 of 18
939501051 Rev G
IMPORTANT: When removing file drawers from pedestal, the cradle assembly must be removed with the
drawer at the same time. Store drawer on the front face to prevent grease damage on carpet etc. To
re-install, file drawer must be seated into the cradle assembly then re-installed into pedestal. This is done
to insure proper drawer alignment and ease of operation. Refer to Fig. P.
Fig P
FILE DRAWER HEAD
CRADLE
BACK FLANGE
Place the rear upper flange of rear pedestal support (Item 23) on top of mounting bracket flange (Item 8)
secure with (2) machine screws (Item 16). Secure front mounting bracket (Item 8a) with (2) machine
screws (Item 16). Refer to Fig.Q. Now replace all drawers.
8
SIDE VIEW OF REAR
MOUNTING BRACKET
Fig Q
16
23
15
8a
16
23
8
16
8b.
Removing file drawers from
pedestal
9.
Installation of a 29" pedestal.
