Page 17 of 18
939501051 Rev G
PUS
H
Suspended Pedestal Without Aprons Worksurface Mounted
Warning: Do not lift or reposition
pedestal by use of channel.
Channel will not support the stress.
A B
C
Dimension “A”
• 24” Deep Worksurface - 22-1/4”
• 30” Deep Worksurface - 28-1/4”
Dimension “B”
• 24” Deep Worksurface 16”
• 30” Deep Worksurface - 22”
Dimension “C”
• Standard - 2-9/16”
• Where Panels Wrap
Around Pedestal - 2-13/16”
1/8” Dia.
1-3/4”
12-3/8”
1/8” Dia.
Front
1.
Drawer Removal
Note: Before starting Assembly of Pedestal
and Desk Remove All Drawers From
Pedestal.
2.
Marking And Drilling Hole
Locations. The hole pattern is
typical for left or right hand side
(right shown).
• 1 Lay worksurface upside-down onto a
soft material.
• 2 Next mark and drill (4) 1/8" dia. x 3/4"
deep. Care should be taken not to drill any
deeper then 3/4".
• 3 In workstations where wall panels wrap
around the pedestal, dim. "C" must be
increased (see chart) to prevent opened
drawers from damaging the panel
decorative surface.
PUS
H
