Page 7 of 18
939501051 Rev G
13
11
11
Fig M
Fig L
Pull drawer out until it stops. Next press in on lock catch while at the same time pulling out on drawer. As drawer
approaches the end of case channel, tip head of drawer down and lift out (see dotted lines). Refer to Fig. N.
NOTE: Mark the location of each drawer prior to removing it from the pedestal case. Each drawer must be re-
installed to its original location in pedestal case.
Fig N
DRAWER HEAD
DRAWER RUNNER
LOCK CATCH
(EACH SIDE
OF DRAWER)
7.
End filler (item 13) is used when
support assemblies (items 3 and 4)
are used. Prior to installing a
pedestal next to a moveable wall,
an end filler (item 13) must be
installed as shown in fig. L with
(1) screw (item 11). After pedestal
has been installed per step 9, drill
a 1/8" dia. hole at bottom corner of
pedestal. Secure with (1) screw
(item 11). Refer to fig. M.
8a.
Removing box drawers from
pedestal.
