Assembly and disassembly
BA_Activa Lift 2 Elektro ©_D_10_2010
14
www.steelcase-village.de
5 Assembly and disassembly
5.1 Safety
DANGER
Contact with electrical voltage may cause serious injury and death by electrocution!
Only remove or insert plug connections when the desk is de-energised
Do not attempt to open the housing of the following components:
•
Controller
•
Electric motor
•
Columns
•
Operator panel
WARNING
Danger of crushing and shearing!
In the entire lift range maintain adequate lateral clearance (at least 25 mm) to all
surrounding objects, walls, etc.:
•
At least 25 mm for distances that remain constant
•
At least 500 mm for obstacles that are not visible
WARNING
Danger of injury or damage!
Set up the desk in such a manner that sufficient space for the complete lift move-
ments, and space for maintenance is ensured.
WARNING
Danger of injury or damage!
When lifting the desktop or the attached components, the attachment screws may
tear.
When transporting or moving the desk only grasp the desk on the upper frame or
on the side frame.
5.2 Power supply connections
Supply connections should only be established by specialists who are qualified and authorized to
do this.
The electrical equipment for the desk must be checked. Loose connections and damaged cables
should be repaired immediately.
Only plug in or unplug plug-and-socket-connections when the electrical equipment is de-energised.
The desk plug must be easily accessible at all times.
