Operation and settings
BA_Activa Lift 2 Elektro ©_D_10_2010
19
www.steelcase-village.de
Integrated
electrification
WARNING
Danger of injury or damage!
Devices and objects that are on the desk can tip over or fall
Power cables for electrification and the electrical devices must be unplugged
from the power outlet before moving the desk!
6.3 Optimal desk height
Adjustment of optimal desk height (sitting height) is crucial to sit properly at the workstation. The
desk height that must be adjusted at the workstation is shown in the workstation analysis (e.g. in
accordance with labour protection laws, the Regulation for Computer Workplaces, accident preven-
tion regulations).
In this regard see also:
http://www.bgbau-medien.de/pdf2/zh_z418.pdf
6.4 Placing the desk in service
The desk can be variably set at a height between 680 mm and 1180 mm (single-telescope variant)
or between 650 mm and 1300 mm (double-telescope variant).
Before placing the desk in service, ensure
• that the desk has been properly assembled,
• that the controller is connected to the motor via cable,
• that the operator panel is connected to the controller.
• that all safety regulations have been complied with.
You can now connect the power supply:
Plug the mains plug into a 220V/230V power outlet
Execute
RESET
Prior to placing the desk in service it is necessary to execute a reset process.
You can find the instructions for use in the Appendix to the relevant operator panel description.
