Page 3 of 18
939564905 Rev E
®
Overview of Assembly Process
1) Determine the table configuration.
2) Attach legs to worksurface (with worksurface upside-down).
3) Attach feet to legs.
4) Attach control box and controller.
5) Connect and route cables.
6) Check for binding and finish leg attachment.
7) Attach wire manager and end caps.
8) Flip table upright and test function.
9) Level and clean it up.
10) PLEASE LEAVE THESE INSTRUCTIONS, AND THE USER GUIDE,
IN AN OBVIOUS PLACE FOR THE END USER AFTER THE ASSEMBLY.
TABLE OF CONTENTS:
4
5
6
7
7 - 9
10 - 11
12 - 14
15 - 16
17
18
Let’s Get Started!...........................................................................................
Attaching Mounting Brackets to Legs............................................................
Attaching Legs to Worksurface......................................................................
Attaching Feet to Legs...................................................................................
Attaching Control Box & Controller................................................................
Connecting & Routing Cables........................................................................
Attaching Wire Manager & End Caps............................................................
Finishing the Table Assembly.........................................................................
Guidelines on Moving the Table.....................................................................
Wiring Guide..................................................................................................
PAGE(S):
