Page 10 of 18
939564905 Rev E
®
Connecting & Routing Cables
Connect the cables to each lifting column and to the control box. Route these cables in the
wire management slots provided on the underside of the control box. Refer to the Wiring
Guide on page 18 for more information.
For optimal wire management, connect lifting columns
to the port on the control box on the opposite side of the
lifting column to which the cable connects, as shown
below. On larger tables, it may be necessary to connect
the cable to the control box port closest to the lifting
column, without using the control box’s integral wire
management slots.
LIFTING
COLUMN 2
LIFTING
COLUMN 1
CONTROLLER
POWER
FILTER
NO FILTER
FILTER
13
To
Lifting Column
To
Control Box
NOTE:
Make sure the end of the cable with the filter
is connected to the
lifting column
as shown above.
FILTER
